Soundproofing Solutions for Walls, Windows and Curtains

Tips To Help Soundproof A Toilet or Bathroom

This article is especially for those people who feel self-conscious whenever they have to use the toilet, secretly hoping no one ventures close enough to hear the sounds they make. Read through to find out how to tackle this mental inconvenience.

When soundproofing some rooms like bedrooms, for instance, the purpose is usually to prevent noise from entering into the room. However, you most likely want to soundproof your bathroom to prevent sounds from going out while you handle your business within. With that being said, it is time to learn how you can make this happen.

Start With the Bathroom Door

The entrance to the bathroom is where you should start and what do we have at the entrance? ‘A door‘. A lot of times, the bathroom door is the major problem. That might be due to the fact that nowadays, doors are constructed in such a way that their insides are hollow. This makes them do a pathetic job of containing sound within a room.

Additionally, there’s also the presence of gaps or spaces which facilitate the movement of sound from the bathroom. Lucky for you, you can solve the door problems.

Seal Gaps around the Bathroom Door

To take care of the gaps, an acoustic caulk (link to Amazon) or a regular sealant will do the trick. If you don’t have either at home, you can always purchase it or order online. Sealing the noticeable gaps in the door could significantly reduce the escape of sound to a tolerable level.

Proceed to look for any gaps within your door panel and door frame. These can be sealed with a weatherstripping tape; it is cheap and you just need to place it around your door frame. You also have the foam material option, but, I would advise you to make do with rubber weatherstripping for your bathroom door. It is a handy product that can be used for windows as well. You can never go wrong with a little more of it.

Application is not rocket science, you can totally do it yourself and it is easy too. First, clean the door frame and measure it. Once you’ve got your measurement, cut out the length measured from the weatherstripping tape with a little extra you can cut off. Peel off the self-adhesive backing on the strip and apply it to the door frame as carefully as you can.

These few tips below will help you perfectly seal your bathroom door

  • Ensure you pay attention to even the slightest gap. Sound will travel through any tiny space, so, search your door thoroughly eliminate all its travel routes that you can find.
  • To help you detect the spots as quickly as possible, try this out: Put off the lights in the bathroom and put on the lights in the room right across the bathroom door. Observe to see if you will notice any light. If you do, that means you’ve got some spots to fill.

Get a Draft Stopper

Naturally, there is always a space between the ground and the bottom of the door, this allows you to open and close the door easily. But, this space also acts as a travel medium for sound. The bigger space it is, the easier it is for sound to go through.

A draft stopper (link to Amazon) is all you need close that channel. There is a variety of products you can get to solve this problem, but make sure to get one that will leave no scratches on your floor (depending on the kind of floor you have).

Make your Bathroom Door Thicker

A simple knock on your door will help you detect if it is really solid or hollow. While hollow doors are cheaper to get, their light nature makes it unable to efficiently prevent sound from leaving a room.

That is not all; a hollow door might even amplify the sound. It’s just like something is out to divulge information about your activities in the toilet which I’m positive you would want to remain private, this might make you feel uncomfortable.

There are two options that will help solve this problem. You can either replace your hollow door with a more solid one or do the job of soundproofing your bathroom door. Bear in mind that the former option will be costlier.

If you decide to do the soundproofing yourself, I recommend using a soundproof blanket. One with grommets is better as it would be easier for you to attach it. Alongside the blanket, you will need a hammer and some nails to help you attach to both tops on your door frame. You can also simply fix some hook; that way, you are able to hang or remove the blanket whenever you please.

 

Tips for the Bathroom Walls

The tips provided above will do a great job of helping you keep sound within the bathroom. With one or a combination of them, you should be able to properly seal your bathroom.

Although it might not be the door you’ll need to worry about, the walls might be guilty of revealing your secret. If you have thin, cracked walls, then that is a problem.

Seal Cracks in Bathroom Walls

It is a natural phenomenon for walls to begin to show cracks after a while; it might take months or years. Remember wear and tear? Well, bathroom walls are often in contact with water, so over time, they might develop cracks.

Fill small cracks with a good waterproof joint compound (link to Amazon) and let it dry. Afterwards, you can go on to apply an extra layer if you need to. On the other hand, you could opt for sanding until you achieve smoothness. Finally, a simple paint job or colourful wallpaper is all that’ll remain to complete (or hide) your work.

Add an Extra Layer to Your Walls

A great way to perfectly soundproof your bathroom wall is to add one more layer to it. You can do this with damping compounds (link to Amazon) and soundproofing materials.

This option might take more time and strain your pockets a little. But, it is efficient and will help with containing sounds within your bathroom.

If you can apply more than one layer, go right ahead. The thicker your wall is, the better it is as it will do a better job of obstructing sound. Remember to use waterproof plasterboard if needed.

A Less Costly Alternative

Are you on a tight budget? There are cheaper alternatives you can work with. Get some thick towels; place them around the bathroom on the shelves and roods. The towels will absorb sounds leaving the bathroom.

Another alternative will be acoustic foam panels, they help reduce echoes. However, the foam material might not be suitable for bathrooms.

What about the Floor?

You might just want to prevent bathroom sound from getting to adjacent rooms. In that case, you don’t need to worry about the floor. Nevertheless, some soft padding will reduce echoes and reverberations and invariable decrease sound.

Getting a bathroom rug or mat will not only help reduce echo but also beautify your bathroom. There are various designs and options to choose from, they are also inexpensive to get.

Simple Way to Soundproof your Toilet Seat

You might get irritated by the sound of the lid hitting the toilet and tank especially if you are part of a large family. Simply telling them to desist from the act might be ineffective. If that is the case, then there is something you can do about it.

Buy some self-adhesive silicone pads (link to Amazon). Place one pad on the top of the toilet seat lid where it makes contact with the flush tank when lifted. Attach another pad to the bottom side of the lid that touches the toilet seat. Finally, place the remaining pads within the toilet and the seat.

Final Thoughts on How to Soundproof A Toilet or Bathroom

I would like to believe at this point that you’ve found ways to soundproof your bathroom. If you have, then proceed to use them. Remember to start off with your door and work your way to the walls.

It is not compulsory to use every single tip instantly. Take care of the more prominent problems first and then try to find out if you can observe any changes. If you feel dissatisfied, you can try something else.

Leave a comment